Juniper - Backup and Restore Configuration by using ftp

** You can use FileZilla FTP Server

Source:

ftp <ip>

ftp> bin

ftp> lcd /config
ftp> put juniper.conf.gz




Destination:
1. root@%
      cli

2. root>
    configure

3. load update terminal
4. CTRL + D
5. commit

V-79-57344-34004 - End of data set was unexpectedly encountered

Problem

We are using "Backup Exec 10D" with service pack4 from BUE. Currently trying to backup four physical servers, and one server always fails to to backup. Errors generated from the Backup Exec's job log:

Job log
Verify- \\Server\D: Unexpected end of backup set encountered on CERTANCE 1.
V-79-57344-34004 - End of data set was unexpectedly encountered.

Solution

Talked to other techs that use Backup Exec software and they were able to give me some tips for this error.

Fix1:
Force the NIC to the same speed of the switch it's connected to.
1. Go to Device manager by -> right clicking My Computer -> Manage
2. Select Device manager -> select NIC card -> right click NIC card
3. Advance TAB -> in the Property window select Speed & Duplex -> Change value drop down to forced speed, instead of "Auto"


Fix2:
1. Ensure the drivers you're using for the tape drives are compatible. This means if you have a tape library ensure the tape library drivers are manufactuers drivers. This is listed in your device manager as "Medium Changers."
2. Ensure the drivers for your "tape drives" are from Symantec Backup Exec. This is listed under your device manager as "Tape Drives."


The first fix1 solved my supposivly network issue.

error E00084F4 V-79-57344-34036

Backup fails with error E00084F4 (V-79-57344-34036).

Error:

A job failed with systems error e00084f4 unknown error (V-79-57344-34036)

Problem description:
There have been multiple instances in which a setting called the RetryBusyCount setting is set too low and this leads to the failure of the backup jobs.  See below for instructions in order to make the registry change on the backup server.  The original setting calls for a value set at 75 decimal,  but it is recommended to change it to 100 decimal or 64 hex,  as is needed in the registry entry.

NOTE:  Please back up the current registry before making this change to preserve the original version. Be careful when making any registry changes as this can cause serious problems.

If the backup jobs continue to fail, then it is recommended to set this value higher,   It is feasible to have this configuration setting set as high as 250, until the issue is resolved.  If issue persists at max value of 250,  then further troubleshooting steps would be in order to determine the source,  causing the failure. Your registry entry would be under the LTO-4 and not the LTO-3 as shown below.

Solution:  To resolve the media write errors, the following steps were taken to modify the registry in Windows on the media server.
1)  Launch regedit by click start, run and type regedit, click ok

2) Browse to  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\SCSI\[device identifier name for the tape LTO-3 tape device]\[numeric device instance id for the LTO-3 tape device]\Device Parameters\

3) Add a key named Storport under Device Parameters (if one does not already exist).

4) Add a key name called BusyRetryCount. The key type is REG_DWORD, and the value should be set to 4b hex (75 decimal).

5) Close regedit

6) Reboot the server

Should do the trick. Worked perfectly when we experienced the issue.

Source: Symantec

http://www.online-it-support.co.uk/?p=1263

גיבוי ושחזור מועדפים בדפדפן - Backup and restore favorites and bookmarks

תוכנה ניידת לגיבוי ושחזור המועדפים של מגון סוגי דפדפנים.

FavBackup is a simple solution for you to backup and restore web browser settings and other data on Windows 7/Vista/XP/2000 systems. No installation required. Don’t forget to check our help section.

If you find any bugs/issues, please use contact form or Twitter to report them.

Screenshots

Supported Browsers

• Internet Explorer 8
• Internet Explorer 7
• Internet Explorer 6

• Firefox 3.7
• Firefox 3.6
• Firefox 3.5
• Firefox 3
• Firefox 2

• Opera 10.6
• Opera 10.5
• Opera 10
• Opera 9

• Safari 4
• Safari 3

• Google Chrome 6
• Google Chrome 5
• Google Chrome 4
• Google Chrome 3
• Google Chrome 2
• Google Chrome 1

• Flock 2.5
• Flock 2.0

לינק לאתר התוכנה:
http://www.favbrowser.com/backup/

הורדה:
http://rapidshare.com/files/422492149/FavBackup.exe

Symantec Backup Exec System Recovery 8.5.3

יצירת גיבוי ושחזור המחשב כולל אופציה לפריסה על חומרה שונה (לא תמיד עובד).

גרסה שתומכת בשרתים כולל server 2008.

Symantec Backup Exec System Recovery (formerly LiveState Recovery) combines the speed and reliability of disk-based, bare-metal Windows® system recovery with revolutionary technologies for hardware-independent restoration and lights-out operation. The result is unparalleled freedom to restore systems anytime, from anywhere, to virtually any device.

Symantec Backup Exec™ System Recovery 8 is the gold standard in complete Windows® system recovery with the ability to restore systems in minutes, even to dissimilar hardware or virtual environments. Now includes flexible offsite protection and enhanced data recovery capabilities, integration with Symantec security and systems management solutions, and support for Windows Server 2008.
With disk-based Backup Exec System Recovery, organizations can recover from system loss or disasters in minutes, even to dissimilar hardware, virtual environments or in remote, unattended locations.

Backup Exec System Recovery 8 now includes flexible offsite protection that enables administrators to automatically copy recovery points to a remote server using FTP or to an external hard drive or network share. A new Granular Restore Option enables organizations to recover Microsoft Exchange mailboxes, folders, messages, and attachments; individual Microsoft SharePoint documents; and individual files or folders in minutes from a single, multi-tab interface.

In addition, Backup Exec System Recovery 8 also includes integration with Symantec's ThreatCon global security alerting system to enable system recovery points to be captured immediately and automatically in the event of an elevated Internet ThreatCon level.
Integration of Backup Exec System Recovery 8 with the Altiris management platform enables administrators to control backup tasks from a familiar interface and database framework. In addition, Backup Exec System Recovery 8 can now intelligently and uniquely communicate to external USB drives and run backup jobs to the given device, even if Windows changes the drive letter for the device.

Also new with Backup Exec System Recovery 8 is logo-certified support for Windows Server 2008, including Restore Anyware technology for dissimilar hardware and physical-to-virtual restoration. Backup Exec System Recovery 8 leverages the power of virtualization for seamless physical to virtual (P2V) and virtual to physical (V2P) conversions to VMware® ESX Server, VMware Server, VMware Workstation and Microsoft Virtual Server disk formats.

Key Features:* Dissimilar hardware restoration with Restore Anyware technology
* Comprehensive virtual conversion capabilities directly to VMDK or VHD files
* Offsite backup copy to FTP location or secondary disk drive for enhanced disaster recovery capabilities
* Granular recovery of Exchange, SharePoint or files and folders from a single, multi-tab interface (via the Granular Restore Option)

Key Benefits:* Easily meet strict recovery time objectives (RTOs) by recovering complete systems in minutes, even from a bare-metal state
* Eliminate backup windows by capturing the entire live Windows system, without disrupting user productivity or application usage
* Innovative multi-product integration with market-leading technologies including Symantec ThreatCon and Altiris Notification Server
* Centrally manage backup and recovery tasks for multiple servers across your entire organization (via Backup Exec System Recovery Manager)

Download : Symantec Backup Exec System Recovery 8.5.3
Download : Symantec Backup Exec System Recovery Disk 8.5.3

 

Symantec Backup Exec System Recovery 2010 Desktop Edition

יצירת גיבוי ושחזור של המחשב כולל פריסה על חומרה שונה (לא תמיד עובד).
גרסה ביתית

Symantec Backup Exec System Recovery (formerly LiveState Recovery) combines the speed and reliability of disk-based, bare-metal Windows® system recovery with revolutionary technologies for hardware-independent restoration and lights-out operation. The result is unparalleled freedom to restore systems anytime, from anywhere, to virtually any device. Symantec Backup Exec™ System Recovery 8 is the gold standard in complete Windows® system recovery with the ability to restore systems in minutes, even to dissimilar hardware or virtual environments. Now includes flexible offsite protection and enhanced data recovery capabilities, integration with Symantec security and systems management solutions, and support for Windows Server 2008. With disk-based Backup Exec System Recovery, organizations can recover from system loss or disasters in minutes, even to dissimilar hardware, virtual environments or in remote, unattended locations.

Symantec Backup Exec System Recovery 2010 Desktop Edition is a simple, cost-effective backup and recovery solution for small businesses that helps minimize downtime and avoid disaster by easily recovering individual data files/folders or complete Windows desktops or laptops in minutes – not hours or days – even to different hardware, virtual environments, or remote locations.

Backup Exec System Recovery includes flexible offsite protection that enables administrators to automatically copy recovery points to a remote server using FTP or to an external hard drive or network share. A new Granular Restore Option enables organizations to recover Microsoft Exchange mailboxes, folders, messages, and attachments; individual Microsoft SharePoint documents; and individual files or folders in minutes from a single, multi-tab interface.

Key Features:
• Backup desktops and laptops automatically, without disrupting employee productivity, and save to any disk storage device
• Recover complete systems in minutes to same or dissimilar hardware with Restore Anyware Technology, including support for Windows 7
• Restore individual files and folders in seconds using the built-in search tool or Google Desktop
• Enables offsite Backup Copy to FTP location or secondary disk drive for enhanced disaster recovery capabilities

Key Benefits:
• Recover what you need, when and where you need it, including individual files, folders or complete systems in minutes, even to dissimilar hardware or virtual environments
• Manage your business not your backups with proactive data and system protection, all from an easy-to-use, wizard-driven interface
• Replace time-consuming, manual and error-prone processes with fast, reliable, automated recovery to dramatically minimize downtime and avoid disaster
• Centrally manage backup and recovery tasks for multiple desktops/laptops across your entire organization (via Backup Exec System Recovery Manager)

Windows 32-bit or 64-bit operating systems:
• Windows Vista Ultimate
• Windows Vista Business
• Windows Vista Enterprise
• Windows XP Professional/Home (SP2 or later)
• Windows XP Media Center
• Windows 7 Ultimate
• Windows 7 Enterprise
• Windows 7 Professional

Homepage - http://www.symantec.com

Download Backup Exec System Recovery - 313 MB

Download Backup Exec System Recovery Disk - 274 MB

Use your existing login credentials to access SymAccount or create new account here

פתרון לבעיית גיבוי volume shadow copy עם Ntbackup

הודעת השגיאה המתקבלת בעת ניסיון לבצע גיבוי למערכת Windows server 2003 SP2 עם Ntbackup:

Backup Status
Operation: Backup
Active backup destination: File
Media name: "server.bkf created 25/11/2010 at 19:11"

Volume shadow copy creation: Attempt 1.

Error returned while creating the volume shadow copy:0x8004230f.

Error returned while creating the volume shadow copy:8004230f
Aborting Backup.

----------------------

The operation did not successfully complete.

----------------------

הודעות השגיאה המתקבלות ב - Event log:

VSS

Event ID: 12292





לינק לפתרון הבעיה:

http://support.microsoft.com/kb/941956

Error events are generated when you try to perform a system state backup on a Windows Server 2003-based computer



To resolve this problem, generate a list of providers that are installed on the system. To do this, run the following command at a command prompt:

vssadmin list providers

This command generates the following output:

Provider name: 'Microsoft Software Shadow Copy provider 1.0'
Provider type: System
Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7

Note This is the default output only if the in-box Volume Shadow Copy Service system provider is installed.

If the command returns additional providers and if you experience any of the error events that are described in the "Symptoms" section, contact the vendor to determine whether an update is available for the provider in question.

To configure the Ntbackup tool to use the in-box Volume Shadow Copy Service system provider as the default provider, follow these steps:

1. Click Start, click Run, type regedit , and then click OK.
2. Locate the following registry subkey, and then right-click it:
   HKey_Local_Machine\SYSTEM\CurrentControlSet\Control\BackupRestore
3. Point to New, and then click DWORD Value.
4. Type UseMicrosoftProvider as the name for the new DWORD value, and then press ENTER.
5. Double-click UseMicrosoftProvider. To enable the new feature, type 1 in the Value box. To disable the new feature, type 0 in the Value box.
6. Press ENTER, and then exit Registry Editor.
7. Restart the server.
8. Use the Ntbackup tool to perform a system state backup.

Volume Shadow Copy Service error: Error creating the Shadow Copy Provider COM class with CLSID {790f2886-9889-4c99-8ef5-531add05d044} [0x8007007e].

For more information, see Help and Support Center at https://exchange.prodigy.co.il/owa/redir.aspx?C=7da325ba0b9b4d6e8ffeed526f1df71e&URL=http%3a%2f%2fgo.microsoft.com%2ffwlink%2fevents.asp.



 

Volume Shadow Copy Service information: The COM Server with CLSID {790f2886-9889-4c99-8ef5-531add05d044} and name SW_PROV cannot be started. [0x8007007e]

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

VSS

Event ID: 11

OR

1: 2: 3: 4: 5:

C:\ntdsutil snapshot  ntdsutil: snapshot  snapshot: activate instance "ntds"  Active instance set to "ntds".  snapshot: create

 
this should come back with a message

1: 2:

Creating snapshot...  Snapshot set {xxxxxxxx-xxxx-xxxx-xxxxxxxxxxxxxxxxx} generated

If all is well , you can use the

1:

list all

command to see created snapshots - and then use

1:

delete *