Symantec Backup Exec System Recovery 8.5.3

יצירת גיבוי ושחזור המחשב כולל אופציה לפריסה על חומרה שונה (לא תמיד עובד).

גרסה שתומכת בשרתים כולל server 2008.

Symantec Backup Exec System Recovery (formerly LiveState Recovery) combines the speed and reliability of disk-based, bare-metal Windows® system recovery with revolutionary technologies for hardware-independent restoration and lights-out operation. The result is unparalleled freedom to restore systems anytime, from anywhere, to virtually any device.

Symantec Backup Exec™ System Recovery 8 is the gold standard in complete Windows® system recovery with the ability to restore systems in minutes, even to dissimilar hardware or virtual environments. Now includes flexible offsite protection and enhanced data recovery capabilities, integration with Symantec security and systems management solutions, and support for Windows Server 2008.
With disk-based Backup Exec System Recovery, organizations can recover from system loss or disasters in minutes, even to dissimilar hardware, virtual environments or in remote, unattended locations.

Backup Exec System Recovery 8 now includes flexible offsite protection that enables administrators to automatically copy recovery points to a remote server using FTP or to an external hard drive or network share. A new Granular Restore Option enables organizations to recover Microsoft Exchange mailboxes, folders, messages, and attachments; individual Microsoft SharePoint documents; and individual files or folders in minutes from a single, multi-tab interface.

In addition, Backup Exec System Recovery 8 also includes integration with Symantec's ThreatCon global security alerting system to enable system recovery points to be captured immediately and automatically in the event of an elevated Internet ThreatCon level.
Integration of Backup Exec System Recovery 8 with the Altiris management platform enables administrators to control backup tasks from a familiar interface and database framework. In addition, Backup Exec System Recovery 8 can now intelligently and uniquely communicate to external USB drives and run backup jobs to the given device, even if Windows changes the drive letter for the device.

Also new with Backup Exec System Recovery 8 is logo-certified support for Windows Server 2008, including Restore Anyware technology for dissimilar hardware and physical-to-virtual restoration. Backup Exec System Recovery 8 leverages the power of virtualization for seamless physical to virtual (P2V) and virtual to physical (V2P) conversions to VMware® ESX Server, VMware Server, VMware Workstation and Microsoft Virtual Server disk formats.

Key Features:* Dissimilar hardware restoration with Restore Anyware technology
* Comprehensive virtual conversion capabilities directly to VMDK or VHD files
* Offsite backup copy to FTP location or secondary disk drive for enhanced disaster recovery capabilities
* Granular recovery of Exchange, SharePoint or files and folders from a single, multi-tab interface (via the Granular Restore Option)

Key Benefits:* Easily meet strict recovery time objectives (RTOs) by recovering complete systems in minutes, even from a bare-metal state
* Eliminate backup windows by capturing the entire live Windows system, without disrupting user productivity or application usage
* Innovative multi-product integration with market-leading technologies including Symantec ThreatCon and Altiris Notification Server
* Centrally manage backup and recovery tasks for multiple servers across your entire organization (via Backup Exec System Recovery Manager)

Download : Symantec Backup Exec System Recovery 8.5.3
Download : Symantec Backup Exec System Recovery Disk 8.5.3

 

Symantec Backup Exec System Recovery 2010 Desktop Edition

יצירת גיבוי ושחזור של המחשב כולל פריסה על חומרה שונה (לא תמיד עובד).
גרסה ביתית

Symantec Backup Exec System Recovery (formerly LiveState Recovery) combines the speed and reliability of disk-based, bare-metal Windows® system recovery with revolutionary technologies for hardware-independent restoration and lights-out operation. The result is unparalleled freedom to restore systems anytime, from anywhere, to virtually any device. Symantec Backup Exec™ System Recovery 8 is the gold standard in complete Windows® system recovery with the ability to restore systems in minutes, even to dissimilar hardware or virtual environments. Now includes flexible offsite protection and enhanced data recovery capabilities, integration with Symantec security and systems management solutions, and support for Windows Server 2008. With disk-based Backup Exec System Recovery, organizations can recover from system loss or disasters in minutes, even to dissimilar hardware, virtual environments or in remote, unattended locations.

Symantec Backup Exec System Recovery 2010 Desktop Edition is a simple, cost-effective backup and recovery solution for small businesses that helps minimize downtime and avoid disaster by easily recovering individual data files/folders or complete Windows desktops or laptops in minutes – not hours or days – even to different hardware, virtual environments, or remote locations.

Backup Exec System Recovery includes flexible offsite protection that enables administrators to automatically copy recovery points to a remote server using FTP or to an external hard drive or network share. A new Granular Restore Option enables organizations to recover Microsoft Exchange mailboxes, folders, messages, and attachments; individual Microsoft SharePoint documents; and individual files or folders in minutes from a single, multi-tab interface.

Key Features:
• Backup desktops and laptops automatically, without disrupting employee productivity, and save to any disk storage device
• Recover complete systems in minutes to same or dissimilar hardware with Restore Anyware Technology, including support for Windows 7
• Restore individual files and folders in seconds using the built-in search tool or Google Desktop
• Enables offsite Backup Copy to FTP location or secondary disk drive for enhanced disaster recovery capabilities

Key Benefits:
• Recover what you need, when and where you need it, including individual files, folders or complete systems in minutes, even to dissimilar hardware or virtual environments
• Manage your business not your backups with proactive data and system protection, all from an easy-to-use, wizard-driven interface
• Replace time-consuming, manual and error-prone processes with fast, reliable, automated recovery to dramatically minimize downtime and avoid disaster
• Centrally manage backup and recovery tasks for multiple desktops/laptops across your entire organization (via Backup Exec System Recovery Manager)

Windows 32-bit or 64-bit operating systems:
• Windows Vista Ultimate
• Windows Vista Business
• Windows Vista Enterprise
• Windows XP Professional/Home (SP2 or later)
• Windows XP Media Center
• Windows 7 Ultimate
• Windows 7 Enterprise
• Windows 7 Professional

Homepage - http://www.symantec.com

Download Backup Exec System Recovery - 313 MB

Download Backup Exec System Recovery Disk - 274 MB

Use your existing login credentials to access SymAccount or create new account here

שינוי שפת ממשק בוינדוס - Change display language in Windows editions

מער' ההפעלה  win 7 (וגם ויסטה) מאפשרת לשנות את שפת הממשק אך ורק בגרסאות enterprise and ultimate
בכדי לשנות שפות בגרסאות אחרות כגון home or pro ניתן להשתמש ב - Vistalizator


לאתר:
http://www.froggie.sk/

טיפול ב - Buffer Overrun Detected

לעיתים אנו נתקלים בשגיאה  buffer overrun בעת הפעלת אחד ממוצרי האופיס.
זה קורה כאשר המילון מותאם אישית שלנו גדול מדי.
אם ניכנס לקובץ custom.dic נוכל לראות שם רצף של סטרינג מאוד ארוך.

הפתרון:

לרוקן את קובץ custom.dic , שנמצא בנתיב הבא:

DOCUMENTS AND SETTINGS->USERNAME->APPLICATION DATA->MICROSOFT->PROOF

יש להכנס לקובץ ולמחוק את תכולתו (CTRL+A ולאחר מכן מחיקה ושמירת הקובץ).

במערכות הפעלה ויסטה ומעלה יש להכנס לתקיית users במקום DOCUMENTS AND SETTINGS

מדריך 1 מטעם מיקרוסופט:

http://blogs.microsoft.co.il/blogs/support/archive/2010/05/09/buffer-overrun-detected.aspx

מדריך 2: סרטון הדרכה לתיקון תקלת Buffer Overrun Detected בOffice 2003

http://blogs.microsoft.co.il/blogs/support/archive/2009/06/09/Buffer-Overrun-Video.aspx

לינק להורדת תיקון - HOTFIX:

Buffer Overrun Detected" error after you install Office 2003 Service Pack 3 for Hebrew

 http://support.microsoft.com/kb/950009

How to increase the Exchange Server 2003 Service Pack 2 18-gigabyte database size limit

הבעיה:

שרת הדואר Exchange Server 2003 Service Pack 2 מוגבל ברמת ה- DB כברירת מחדל לגודל מקסימלי של 18GB

ניתן בצורה יחסית קלה ופשוטה להגדיל את המגבלה עד ל - 75GB

הסבר כיצד להגדיל את המגבלה  ל - 75GB:

http://support.microsoft.com/kb/912375

How to increase the Exchange Server 2003 Service Pack 2 18-gigabyte database size limit

New functionality has been included with Microsoft Exchange Server 2003 Service Pack 2 (SP2). You can now configure database size limits.

The database size limits for Microsoft Exchange Server 2003 Standard Edition have been increased from 16 GB to 18 GB. The limit can be increased to as much as 75 GB by using a registry key.

Microsoft Exchange Server 2003 Enterprise Edition does not have a maximum database size limit.

To increase the Exchange Server 2003 SP2 database size, follow these steps:

Important Before you increase the maximum size of an Exchange database, verify that sufficient hard disk space is available for the larger database.

1. On the computer that is running Exchange 2003 SP2, click Start, click Run, type regedit, and then click OK.
2. Click one of the following registry subkeys, as appropriate for the store that you want to increase:
   • For a mailbox store, click the following registry subkey:
     HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MSExchangeIS\Server name\Private-Mailbox Store GUID
   • For a public folder store, click the following registry subkey:
     HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MSExchangeIS\Server name\Public-Public Store GUID
3. On the Edit menu, point to New, and then click DWORD Value.
4. In the New Value #1 box, type Database Size Limit in Gb, and then press ENTER.
5. Right-click Database Size Limit in Gb, and then click Modify.
6. Click Decimal, and then type an integer from 1 to 75 in the Value data box.
   
   Note These integer values represent the maximum size of the database in gigabytes (GB). For example, a value of 75 represents a database that has a maximum size of 75 GB.
7. Click OK, and then exit Registry Editor.
8. Restart the Microsoft Exchange Information Store service. To do this, follow these steps:
   1. Click Start, click Run, type cmd, and then click OK.
   2. At the command prompt, type the following command, and then press ENTER:
      net stop msexchangeis
   3. After the Microsoft Exchange Information Store service has stopped successfully, type the following command, and then press ENTER:
      net start msexchangeis
9. Examine the Application log to verify that the database size has been set successfully. To do this, follow these steps:
   1. Click Start, click Run, type eventvwr, and then click OK.
   2. In the Event Viewer tool, click Application.
   3. Double-click event ID 1216 to verify that the database size has been set successfully.



הערות:

1. כשמתחילים להתקרב למגבלת הגודל ( 18 גיגה במקרה של ברירת המחדל ו 75 גיגה במקסימום) יופיעו הודעות ב - EVENT LOG וכשממש נהיה קרובים למגבלה, ה - service של ה - information store לא יעלה באופן אוטומאטי ועשוי להגיע עד למצב שלא נוכל לבצע mount ל - information store

2. הגבלת הגודל אינה חלה על גרסת Enterprise

מידע נוסף:

1. Exchange 2007 standard SP1 מוגבל ל – 250 גיגה
http://blog.sembee.co.uk/post/Exchange-Database-Size-and-Limits.aspx

מידע נוסף גם ניתן לקבל כאן:
http://technet.microsoft.com/en-us/library/bb218437(EXCHG.80).aspx


2. Exchange 2010 standard SP1 מוגבל ל – 1024 גיגה
http://technet.microsoft.com/en-us/library/bb232092.aspx

פתרון לבעיית גיבוי volume shadow copy עם Ntbackup

הודעת השגיאה המתקבלת בעת ניסיון לבצע גיבוי למערכת Windows server 2003 SP2 עם Ntbackup:

Backup Status
Operation: Backup
Active backup destination: File
Media name: "server.bkf created 25/11/2010 at 19:11"

Volume shadow copy creation: Attempt 1.

Error returned while creating the volume shadow copy:0x8004230f.

Error returned while creating the volume shadow copy:8004230f
Aborting Backup.

----------------------

The operation did not successfully complete.

----------------------

הודעות השגיאה המתקבלות ב - Event log:

VSS

Event ID: 12292





לינק לפתרון הבעיה:

http://support.microsoft.com/kb/941956

Error events are generated when you try to perform a system state backup on a Windows Server 2003-based computer



To resolve this problem, generate a list of providers that are installed on the system. To do this, run the following command at a command prompt:

vssadmin list providers

This command generates the following output:

Provider name: 'Microsoft Software Shadow Copy provider 1.0'
Provider type: System
Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7

Note This is the default output only if the in-box Volume Shadow Copy Service system provider is installed.

If the command returns additional providers and if you experience any of the error events that are described in the "Symptoms" section, contact the vendor to determine whether an update is available for the provider in question.

To configure the Ntbackup tool to use the in-box Volume Shadow Copy Service system provider as the default provider, follow these steps:

1. Click Start, click Run, type regedit , and then click OK.
2. Locate the following registry subkey, and then right-click it:
   HKey_Local_Machine\SYSTEM\CurrentControlSet\Control\BackupRestore
3. Point to New, and then click DWORD Value.
4. Type UseMicrosoftProvider as the name for the new DWORD value, and then press ENTER.
5. Double-click UseMicrosoftProvider. To enable the new feature, type 1 in the Value box. To disable the new feature, type 0 in the Value box.
6. Press ENTER, and then exit Registry Editor.
7. Restart the server.
8. Use the Ntbackup tool to perform a system state backup.

Volume Shadow Copy Service error: Error creating the Shadow Copy Provider COM class with CLSID {790f2886-9889-4c99-8ef5-531add05d044} [0x8007007e].

For more information, see Help and Support Center at https://exchange.prodigy.co.il/owa/redir.aspx?C=7da325ba0b9b4d6e8ffeed526f1df71e&URL=http%3a%2f%2fgo.microsoft.com%2ffwlink%2fevents.asp.



 

Volume Shadow Copy Service information: The COM Server with CLSID {790f2886-9889-4c99-8ef5-531add05d044} and name SW_PROV cannot be started. [0x8007007e]

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

VSS

Event ID: 11

OR

1: 2: 3: 4: 5:

C:\ntdsutil snapshot  ntdsutil: snapshot  snapshot: activate instance "ntds"  Active instance set to "ntds".  snapshot: create

 
this should come back with a message

1: 2:

Creating snapshot...  Snapshot set {xxxxxxxx-xxxx-xxxx-xxxxxxxxxxxxxxxxx} generated

If all is well , you can use the

1:

list all

command to see created snapshots - and then use

1:

delete *

Cisco Factory Reset Password Recovery

If you need to do a "factory reset" on one of these you can.


Connect to the console using serial cable.
Switch on while hitting CTRL-BREAK

(on laptop hit FN-CTRL-BREAK)

 

Tricky, may take a few attempts - need to be hitting it really early on in the boot process.
Get rommon>

 

confreg 0x2142

 

OR

1. >confreg, >yes, >no to everything except "ignore system config info".

2. >reset

It will then reboot from an alternate configuration file, and you're in! Now however, to clear the existing setup and revert the router to a good state.

1. Router>enable
2. Router#conf t
3. Router(config)config-register 0x2102
4. Router(config)exit
5. Router>write memory
6. Router>reload

Useful guide:

• http://www.petri.co.il/forums/showthread.php?t=9328
• http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/products_tech_note09186a00802017a1.shtml

FREE VIDEO: How to Reset or Recover your Lost Cisco Router or Switch Password

http://happyrouter.com/free-video-how-to-reset-or-recover-your-lost-cisco-router-or-switch-password